CONTROL SOLUTIONS CS1171 - Page 18

CS1171 Hand-Held Programmer User's Manual
Control Solutions LLC Page 18 of 56
Power/Enter button is pressed before the parameter is saved, the parameter may
revert back to its previous value. (Refer to Menus and Parameters and Parameter
Information for details on specific parameters).
6. To enter a menu other than the Main menu:
Step
Action
1
Scroll through the Main menu using + to scroll up, and – to scroll
down, to the sub-menu you wish to enter
 Sub-menus are easy to recognize by the > after the menu name;
when selected, the sub-menu name will blink
2
Press > to enter the sub-menu
 The first entry in all sub-menus is a return to the < Main menu
item
3
Repeat the steps listed in the Table 6 to change a parameter within
the sub-menu
4
Press + to scroll up to the < Main menu item
5
Press < to return to the Main menu
Table 7 - Accessing a Sub-menu
Refer to Menus and Parameters and Parameter Information for details on the
specific menus.
7. When finished using your HHP, it can be turned off by:
 Pressing the Power/Enter button on the HHP,
 Disconnecting it from the controller or Y-Adapter, or
 Turning off the controller power.
You can rapidly scroll through menu parameters or
increment/decrement parameter values by pressing and
holding the + or – buttons.