Commander SE User Guide
Issue Number 8
Contents
1 Safety Information 1
1.1 Warnings, Cautions and notes 1
1.2 Electrical safety - general warning 1
1.3 System design and safety of personnel 1
1.4 Environmental limits 2
1.5 Compliance with regulations 2
1.6 Motor 2
1.7 Adjusting parameters 2
2Options 3
3 Technical Data 4
3.1 Power dependant rating data 4
3.2 General data 12
3.3 RFI Filters 14
4 Installing the drive 16
4.1 Safety information 16
4.2 Planning the installation 16
4.3 Mechanical installation 17
4.4 Electrical installation 23
4.5 Electromagnetic compatibility (EMC) 27
5 Terminals 34
5.1 Power terminal connections 34
5.2 Control terminal connections 35
5.3 Serial communication connections 36
5.4 Control terminal specifications 37
6 Handling and Programming 40
6.1 Display and keypad 40
6.2 Display Messages 41
6.3 Selecting and changing parameters 41
6.4 Saving parameters 42
6.5 Security codes 42
6.6 Setting a security code 42
6.7 Unlocking a security code 43
6.8 Set security back to zero (0) - no security 43
6.9 Setting to default values 43
6.10 Level 1 and level 2 parameter descriptions 43
7 Getting Started - Bench Testing 61
7.1 Terminal control 61
7.2 Keypad control 63
8 Diagnostics and Protective Features 65
8.1 Trip codes 65
8.2 Alarm warnings 67
8.3 HF-Hardware fault trip codes 67
To Next Page
Loading...
Need help?
General
