Need help?Do you have a question about the Control Techniques Commander SE Series and is the answer not in the manual?
General| Storage Temperature | -40°C to +70°C |
|---|---|
| Communication Options | Modbus RTU, CANopen, Ethernet |
| Cooling Method | Fan cooled |
| Enclosure Rating | IP20 |
| Output Voltage | 0-100% of input voltage |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Short circuit, Ground fault, Overtemperature |
| Humidity | Up to 95% relative humidity, non-condensing |
Information regarding the software version of the drive and potential differences.
Statement of compliance with European harmonised, national, and international standards.
Essential information for avoiding safety hazards and risks of damage to equipment.
Overview of available optional accessories for the Commander SE drive.
Detailed specifications for different drive sizes, including power, current, and voltage ratings.
Instructions and warnings for safe mechanical and electrical installation of the Drive.
Diagrams and explanations for connecting power supply, motor, and braking resistor terminals.
Overview of the Drive's display, control keys, and programming keys.
Basic setup and testing procedures using terminal connections.
Explanation of trip codes, their conditions, and possible causes for Drive faults.
Comprehensive list of all configurable parameters for the Commander SE drive.
Options for precise speed referencing and control.
General UL listing requirements, AC supply specifications, and protection features.
To Next Page
