Commander SE User Guide
Issue Number 5
Contents
1 Safety Information 3
1.1 Warnings, Cautions and notes 3
1.2 Electrical safety - general warning 3
1.3 System design and safety of personnel 3
1.4 Environmental limits 4
1.5 Compliance with regulations 4
1.6 Motor 4
1.7 Adjusting parameters 4
2 Options 5
3 Technical Data 6
3.1 Power dependant rating data 6
3.2 General data 13
3.3 RFI Filters 14
4 Installing the Drive 17
4.1 Safety information 17
4.2 Planning the installation 17
4.3 Mechanical installation 18
4.4 Electrical installation 21
4.5 Electromagnetic compatibility (EMC) 24
5 Terminals 30
5.1 Power terminal connections 30
5.2 Control terminal connections 31
5.3 Serial communication connections 32
5.4 Control terminal specifications 32
6 Handling and Programming 35
6.1 Display and keypad 35
6.2 Display Messages 36
6.3 Selecting and changing parameters 36
6.4 Saving parameters 37
6.5 Security codes 37
6.6 Setting a security code 37
6.7 Unlocking a security code 38
6.8 Set security back to zero (0) - no security 38
6.9 Setting to default values 38
6.10 Level 1 and level 2 parameter descriptions 38
7 Getting Started - Bench Testing 53
7.1 Terminal control 53
7.2 Keypad control 55
To Next Page
Loading...
Need help?
General
