Controls MX Series User Manual

29
AUTO START MODE
With power on to the module, press the white AUTO button to place the unit in the Auto Start mode.
The display will indicate that the module is now in the Auto mode. The status line will display Auto Off.
While in the Auto Off mode, the controller will await an auto start signal. Once received, the module
will initial the start sequence and start the engine. It will remain running until the stop criteria is met.
At that point, it will begin the shutdown sequence by starting cooldown mode. Once complete, the
engine will be stopped.

Controls MX Series Specifications

General

Brand	Controls
Model	MX Series
Category	Control Unit
Language	English