CONVAID USER’S GUIDE
7
Seat-to-Footplate Height Adjustment
The soles of the feet or heels should
rest comfortably on top of the foot-
plates. To achieve this, remove detent
pins on the front of the leg tubes, slide
the footplate to the desired position
and reinsert the pins. Fig. 17b In case
of an especially short seat-to-footplate
adjustment, the excess material of the
calf flap may be wrapped under the
footplate and attached with Velcro®.
Foot
support
height
Fig.17a
Fig.17b
Seat-to-footplate height is measured
from the back of the knee to the
bottom of the heel. Soles of the feet or
heels should rest comfortably on top
of footplates. Fig. 17a
To Next Page
Loading...
