CONVAID USER’S GUIDE
3
Folding
Fig.7
Fig.6
Fig.8
Fig.9
1. Before folding, the front wheels of
chair should be in a forward facing
position for best results. Fig. 6
2. Tilt chair in upright position.
3. Push in grey detent buttons on the
footplate, and swing footplate out
and upward until parallel with the
ground. Fig. 7
4. Apply wheel locks. Fig. 8
5. Squeeze the lever located on the back of the seat and push forward and down.
Fig. 9 Release the lever when the chair is at its lowest position.
To Next Page
Loading...
