In event that the front wheels develop a shi mmy, use a
wrench (3/4”) to ti ghten the stem nut. Adjust the stem
nut clockwise until the shimmy disappears. Fig. 87 & 88
Anti-Shimmy
Rear Tire Installation
Fig. 87 Fig. 88
Fig. 85 Fig. 86
CONVAID USER’S GUIDE
27
Caution:
Always make sure the wheels
are installed properly. You
will hear a “click” when the
wheel locks into place. Pull on
wheel to confirm installation.
To install, slide wheel onto rear
axle and push wi th ball of hand
until it clicks into place.
!
To Next Page
Loading...
