6.2.2 Emergency Mode
Running the combi steamer in emergency mode
The combi steamer features an emergency mode in order to allow you to keep using it if there is an
error or fault that cannot be fixed right away.
This mode will let you keep running the appliance (with a number of limitations) even when there is a
malfunction.
Always notify Customer Service!
Prerequisites
The appliance is malfunctioning.
An acoustic signal is emitted.
An error code is shown on the display.
Running the appliance in emergency mode
1.
Confirm the error being displayed and start a cooking or
cleaning profile that uses an available operating mode.
L
imitations
Cooking times may be longer and cooking results may be uneven. Because of this, pay special
attention to the cooking sequence and to how well-cooked your product is.
The appliance may need to use more water than usual.
Fully automatic and semi-automatic cleaning may not be available or may only be possible to a
limited extent.
It may not be possible to use the core temperature probe and the optional sous vide probe in
certain cases.
The only functions available will be those not affected by the fault, error, or malfunction that has
occurred.
Cooking programs that can be used in emergency mode
The following table lists the errors after which the appliance can still be used in emergency mode if the
error cannot be fixed right away.
Error
No.
Limitations / Procedure
E01.x
- - Up to
284 °F
No boiler pre-heating
Cleaning will not be possible
E
02
x Up to
284 °F
Up to
284 °F
Up to
284 °F
Let the appliance cool down
Finish cooking the product at a lower cooking
temperature and with a longer cooking time
Cleaning will not be possible
E
03.x
At
212 °F
--- Longer cooking time
Uneven cooking results are possible (the food in
the upper racks will be ready first)
E21.1
At
212 °F
--- Longer cooking time
Uneven cooking results are possible
Cleaning will not be possible
6 How to Perform Maintenance on the Combi Steamer
Operating Manual 118
To Next Page
Loading...
