Convotherm 4 User Manual

Removing the halogen lamp
1.
Remove the four oven light hex screws using the socket
wrench.
Due to its design, the assembly consisting of the screws,
bezel, glass pane, seal, and bracket will remain together
when the screws are unscrewed.
2.
Remove the entire assembly from the cooking
compartment wall.
3.
Reach into the reflector housing through the opening on
the cooking compartment wall
and pull out the halogen
lamp upwards in a straight line.
Installing the halogen lamp
1.
Follow the same steps used to remove the halogen lamp,
but in opposite order.
Once you are done, remove all objects from the cooking
compartment. Then rinse or wipe the cooking
compartment clean.
6 How to Perform Maintenance on the Combi Steamer
Operating Manual 126

Convotherm 4 Specifications

General

Model	Convotherm 4
Type	Combination Oven
Temperature Range	30°C to 300°C
Hygienic Door Handle	Yes
Construction	Stainless steel
Cooking Modes	Convection, Steam, Combination
Energy Source	Electric
Cleaning System	Automatic Cleaning System
Power Supply	400V