Sheet pans, in U-rails (standard version)
The following figure shows how to set up a full-size sheet pan (18” x 26”), half-size sheet pans (13” x
18”), and quarter-size sheet pans (13” x 9.5”), in the U-rails (standard version) in size X.20 appliances:
Placement rules
Shelf grills (3) must be slid in between the two
flanges on the U-rails (1).
The shelf grills must be slid in at the same
height on both sides.
Never place shelf grills on top of a U-rail’s
upper flange.
Do not place steam table pans on top of shelf
grills.
The sheet pans (2) must be placed, one after
the other, on top of the
shelf grills that are
already in place.
Do not slide in the sheet pans between the
two flanges on the U-rails.
Do not place bakeware on top of sheet pans.
4 How to Cook with Your Combi Steamer
Operating Manual 47