4.2.3 Cooking Procedures
For your safety when working with/on the combi steamer
Before starting work, read and understand the rules, risks, and hazards specified in “
Safely Using the
Appliance
on page 50” and follow all the corresponding instructions without exception.
Procedures that you must be familiar with
You will need to be familiar with the following steps:
Safely Opening and Closing the Appliance Door 60
Placing Food Inside and Taking It Out 62
Putting Away and Removing the Core Temperature Probe 68
Using a USB Stick 69
R
ules
Putting plates inside the combi steamer is only allowed when rethermalizing food.
Prerequisites
You must be familiar with how to use the software to such an extent that you will be able to access
the stored cooking profiles you will need for your food or enter a new cooking profile and start it
(see operating instructions).
The combi steamer and the accessories being used must have been cleaned properly.
There must not be any foreign objects inside the cooking compartment.
The cooking compartment drain must be clear. It must not be clogged or blocked by any residues.
The strainer on the oven drain must be in place.
The appliance door’s inner glass door must be properly locked in place.
The USB cover must be covering the USB port.
The suction panel is properly locked in place.
You must have the food that will be put inside the combi steamer ready to go in the loading trolley
or plate loading trolley.
Cooking Procedures
1.
Open a cooking profile from the cookbook or enter a new
cooking profile.
2
.
Follow the software’s prompts.
3
.
Open the appliance door.
4
.
Place the food inside the combi steamer.
5
.
Close the appliance door.
4 How to Cook with Your Combi Steamer
Operating Manual 55
To Next Page
Loading...
Need help?
General
