General information
Installation manual 10
Chapters in the installation manual
The table below lists the chapters in this manual and summarizes their content and purpose:
Step Action
General information
Shows you how to identify your combi steamer.
Provides guidance on using this installation manual.
Layout and function
Specifies the intended use of the combi steamer.
Explains the functions of the combi steamer and shows the position of its
components.
For your safety
Describes the hazards posed by the combi steamer and appropriate preven-
tive measures.
It is important that you read this chapter carefully.
Moving and setting up the
appliance
Specifies the basic appliance dimensions.
Specifies requirements for the installation location.
Provides information on conveying the appliance to the installation location,
unpacking and setting up.
Connecting up the combi
steamer
Lists necessary approvals.
Provides information on installing the:
electrical supply
gas
water
flue gas
drain
air vent
Preparing for first-time use,
taking out of service and
disposal
Explains the procedure for preparing the appliance for first-time use.
Explains the procedure for taking out of service.
Contains disposal instructions.
Optional equipment
Describes features of the various optional equipment.
Technical data, dimensional
drawings and connection
diagrams
Contains the technical data and connection diagrams.
Checklists and completion of
installation
Contains the checklists for
Installation
Safety instructions and warnings
Customer guidance and instruction.
Contains information on the warranty and explains the completion procedure
using the checklists.
Symbols used for safety instructions
Safety instructions are categorized according to the following hazard levels:
Hazard level Consequences Likelihood
Death / serious injury (irreversible) Immediate risk
Death / serious injury (irreversible) Potential risk
Minor injury (reversible) Potential risk
Caution
Damage to property Potential risk