Optional equipment and accessories
Installation manual 81
► Stacking kit
Function
The stacking kit can be used to place two combi steamers one above the other.
Requirements
Make sure that the following requirements have been met:
The stacking kit must be secured against toppling over.
Permitted combinations
Caution
Never place a size 10.10 or 10.20 appliance on top.
You can only install electric appliances on electric appliances and gas appliances on gas appliances.
The following combinations are allowed:
6.10 on 6.10
6.10 on 10.10
6.20 on 6.20
6.20 on 10.20
Equipotential bonding
Incorporate the stacking kit in the equipotential bonding system.
Assembly and installation
Please refer to the separate instructions for information on assembling and installing the stacking kit.
To Next Page
Loading...
