Convotherm OGS 6.10 Installation Manual

For your safety
Installation manual 24
► Requirements to be met by personnel, personal protection equip-
ment and working positions
Requirements to be met by personnel
Those people using the combi steamer must meet the following requirements:
Personnel Tasks Qualifications Personal protection equipment
required
Equipment mover
 Conveying within the
establishment
Trained in the use of a
pallet truck and forklift
truck
 Safety boots
 Hard hat (e.g. when heavy loads
are being lifted, working over-
head...)
Service engineer
 Setting up the appliance
 Connecting the appliance
 Preparing the appliance
for first-time use
 Taking the appliance out of
service
 Instructing the user
 Is an employee of an
approved customer
service unit.
 Has relevant technical
training.
 Is trained in the particu-
lar appliance.
Work wear and personal protection
equipment depending on the job
that needs doing as specified in
national regulations.
Gas fitter  Connecting the appliance:
gas
 Isolating the appliance
from the gas supply mains
 Is a gas fitter author-
ized by the gas supply
company.
 Has relevant professi-
onal training.
Work wear and personal protection
equipment depending on the job
that needs doing as specified in
national regulations.
Electrical fitter  Connecting the appliance:
electric
 Isolating the appliance
from the electrical supply
mains
 Is an employee of an
approved customer
service unit.
 Has relevant professi-
onal training.
 Is a qualified electrici-
an.
Work wear and personal protection
equipment depending on the job
that needs doing as specified in
national regulations.
Working positions when installing and preparing the appliance for first-time use
The working position for personnel installing and preparing the appliance for first-time use is the entire
appliance area.

Convotherm OGS 6.10 Specifications

General

Brand	Convotherm
Model	OGS 6.10
Category	Kitchen Appliances
Language	English