Connecting up the combi steamer
Installation manual 61
► Gas installation for liquid gas bottles on OGS/OGB appliances
Risk of explosion
Risk of explosion from escaping gas
Escaping gas can ignite and cause an explosion.
If you smell gas, follow the instructions below:
f Cut off the gas supply immediately.
f Ventilate the room thoroughly.
f Avoid creating a spark (e.g. by operating a switch, using a phone or touching electrical switching
elements).
f Tell the gas supplier or even the fire brigade (external telephone).
f Leave the building together with all other personnel.
Risk of explosion
Risk of explosion from excess pressure
Fitting liquid gas bottles incorrectly can result in an explosion because of excess pressure.
Follow the fitting instructions below:
f Always install liquid gas bottles in an upright and stable position.
f Never use liquid gas bottles lying on their side.
f Prevent liquid gas bottles from getting hot.
f Never place liquid gas bottles in the warm air stream from the appliance.
Risk of suffocation
Risk of suffocation from lack of air suitable for breathing
Inadequate ventilation at the installation location can lead to suffocation.
Follow the instructions below accordingly:
f Only use the appliance in well ventilated rooms.
f Ensure that there is a sufficient supply of air for the level of combustion.
Class of gas appliance
There are two possible classes of gas appliance for the combi steamers:
Type Meaning Usage
B23
Open flues dependent on room air
with fan upstream of the burner and
without draught diverter
OGS and OGB appliances are supplied as type B23 gas
appliances
B13
Open flues dependent on room air
with fan upstream of the burner and
with draught diverter
All appliances can be installed as type B13 appliances by
retrofitting a draught diverter (available as a special acces-
sory).
To Next Page
Loading...
Need help?
General
