Note:
DVD disc production quality may vary and some discs may deviate from
the industry standard. Some incorrectly formatted discs may still play,
however, the playback and operational quality of the disc may be
substandard.
Playable Discs
This player will play CD, VCD, DVD etc.
Note:
If you have trouble with playing a certain disc, remove the disc and try a
different one. Improperly formatted discs will not play on this player.
Turn On/ Off the Player
Slide the Power switch on the right side of the player to “ON” position to
turn on the player after connecting the mains power supply.
Slide the Power switch on the player to “OFF” position to turn off the
player completely.
Note:
If the player will not be in use for a long period of time, slide Power switch
to the “OFF” position and unplug the portable DVD player from the power
source.
Selecting the Different Mode (DVD/USB/CARD)
When the DVD player is in the stop mode; press the USB/CARD button on
the remote control or the unit to select DVD or USB or SD play mode if
certain discs or memory devices are connected. When a USB mass storage
device is simultaneously inserted, the USB device will be recognized.
Playing Discs
Bad/No disc: The player is equipped with automatic disc quality
detection software. If the player detects a disc that is damaged or has a
format problem, it may play the disc at a lower quality or stop playing
completely, depending on how serious the damage is.
Slide the Power switch near the charging port on the player to “ON”
position to turn on the player.
Open the disc lid cover and insert a DVD or CD disc, Make sure the
label side is facing up, and then close the disc lid.
1.
2.
●
01 02 03 04 05
06 07 08 09 10 11
12
13
14 15 16 17 18 19 20 21
22 23 24 25 26 27 28
To Next Page
Loading...