Using the Disc Menu
Depending on the disc, a disc menu may appear on the screen once you
load the disc.
Return to the Root Menu or Title Menu
During the disc playback, press the MENU button to return to the disc’s
root menu or title menu (depending on the disc). For MP3 DVD. Picture
discs, press it to go to the file or folder list after pressing the MENU or
stop button. Use Direction buttons (UP/DOWN/LEFT/RIGHT) or Numeric
buttons to select a play option. Press the ENTER button to confirm and
start playing.
The player will scan the disc, and then it will start playing automatically.
If a disc menu appears on the screen, see “Using the disc menu” for
details.
If the disc is locked by parental controls, you must enter your password
(see “SYSTEM SETUP” section for details).
During the playback, press the STOP button to stop.
Sliding the Power Switch on the player to “OFF” position will turn off
the player.
Press the MENU button on the remote control to activate or deactivate
the PBC function.
PBC playback allows you to play Video CDs (VCD version 2.0 only)
interactively.
Press the MUTE button on the remote control to turn on or off the
sound.
Press the GO TO button on the remote control to select the play
duration.
Press the REPEAT/PROG on the remote control button to re-setup the
playing order.
3.
4.
5.
6.
7.
8.
9.
10.
From the file/folder list menu, use the Direction buttons (UP/DOWN)
to select the file and press the ENTER button to start.
If the file is saved in a folder, press Direction buttons (UP/DOWN) to
select the saved folder and press the ENTER button to open the folder.
1.
2.
01 02 03 04 05
06 07 08 09 10 11 12
13
14 15 16 17 18 19 20 21
22 23 24 25 26 27 28
To Next Page
Loading...