CookingPal Multo - Page 15

15Choosing the Setup Location
• Never leave the CookingPal® Multo
TM
unattended
while it is running.
•
NOTICE
Damage Risk
If the main unit is connected to an unsuitable power
supply, it will get damaged.
• Only operate the CookingPal® Multo
TM
with the
alternating current voltage of 114–126 V and main
frequency of 50 to 60 Hz, as indicated on the plug
label.
NOTICE
Damage Risk
Never place CookingPal® Multo
TM
directly under
furniture and fittings (shelving units, wall units or
similar), while in use. Doing so may result in property
damage.
• Ensure that there is sufficient clearance above
and around the CookingPal® Multo
TM
, taking into
account the additional height when using the
steaming tray and lid.
1. Always place the CookingPal® Multo
TM
on clean,
solid, and flat horizontal surface so that it cannot
slip.
2. Ensure that the ventilation opening on the back
of the appliance is kept clean (free of grease
splashes, etc.).
3. Remove the protective foil from the Smart Kitchen
Hub.
4. Do not use the CookingPal® Multo
TM
with an
extension cord.
5. Do not place the main unit on top of the power
cord. If you do, it will not rest evenly on the
surface.