CookingPal Multo - Cooking Modes; Knead

35Cooking Modes
12.0 Cooking Modes
1. Tap “Cooking Modes”. Scroll on the display or rotate the jog dial to find the desired cooking mode including
Knead, Steam, Sauté, Scale, Keep Warm and Manual.
2. Tap on the mode or press the jog dial to select the mode.
NOTICE
To quickly switch to Guided Cooking, tap “Guided” on the top left side of the Hub.
12.1 Knead
TIMER MIN SEC
00 45
• To prevent the appliance from overheating, do
not run Knead mode for more than 2minutes
after each kneading session and allow at least 10
minutes before next use.
The mode is intended for kneading a dough.
1. Place the ingredients for the dough into the mixing
bowl and lock the lid.
2. On the Hub, tap the timer on the left side,
then scroll or use the jog dial to set the timer
(1second–2 minutes).
3. Tap “Start” to start kneading. Press “Pause” to stop
and “Resume” to continue kneading.
4. Kneading is finished when the countdown is over.
NOTICE
• Do not use the butterfly whisk when using the
Knead mode.
• Only a maximum of 1.8lbs (800 g) of dough can
be mixed at a time.