21Assembling the Mixing Bowl
WARNING
• Contents of the mixing bowl can spill out and
cause damage and injury if the lid seal is not
positioned correctly.
• Do not try to open with force.
• Securely lock the measuring cup when processing
hot food to avoid injury.
• Do not operate without the measuring cup locked in
place when processing hot contents at a high speed.
• Do not touch or fix the measuring cup when
processing hot food to avoid injury.
• Never overload the ingredients or liquids past the
MAX mark capacity (3.1 QT / 3 L).
• If boiling-over occurs, stop the appliance
immediately by carefully removing the plug
from the electrical outlet in the wall to avoid the
potential of being scalded by any overflowing
boil-over.
NOTICE
Ensure the blade seal and blade are
securely locked.
4. Place the assembled mixing bowl on the main unit
and ensure the connection points are clean, dry
and unobstructed.
5. Place the lid seal inside the lid.
6. Place the lid on, rotate it clockwise until it locks.
7. Place the measuring cup in place, rotate it
clockwise until it locks.
To Next Page