CoolAutomation CoolMasterNet - Boot; Sddp

ASCII I/F
CoolMasterNet PRM Rev 0.7
22
www.coolautomation.com
© 2017 CoolAutomation
Netmask
R/W
string
Set Netmask address in case IP is static
Gateway
R/W
string
Set Gateway address in case IP is static
DNS1
R/W
string
Set prefered DNS address
DNS2
R/W
string
Set alternate DNS address
EXAMPLE
Query
>ifconfig
MAC : 28:3B:96:00:02:0F
Link : Up
IP : 192.168.16.108 (DHCP)
Netmask: 255.255.255.0
Gateway: 192.168.16.254
DNS1 : 8.8.8.8
DNS2 : 8.8.4.4
OK
Configure fixed IP, Gateway and Netmask
>ifconfig IP 192.168.1.102
OK, Boot Required!
>ifconfig Gateway 192.168.1.0
OK, Boot Required!
>ifconfig Netmask 255.255.0.0
OK, Boot Required!
Configure DHCP client operation
>ifconfig IP DHCP
OK, Boot Required!
Disable Ethernet
>ifconfig disable
OK, Boot Required!
Change DNS prefered address
>ifconfig DN1 208.67.222.222
OK, Boot Required!
boot
SYNOPSIS
boot
boot [N]
DESCRIPTION
· <N> omitted - Enter Boot Mode
· <N> = 2 - Reset CoolMasterNet
sddp
SYNOPSIS
sddp
sddp <enable|disable|identify|offline|alive>
DESCRIPTION
Configure Control4® Simple Device Discovery Protocol (SDDP) module. CoolMasterNet is compliant with
Control4® SDDP v1.0 specification and can act as SDDP enabled device.