D
、
Auto infinite loop function (off by default)
This function can perform infinite loop functions on selected buttons. When the button is
pressed, the button is locked in the held down state until the button is pressed again and
released. This function can achieve an infinite automatic operation of one button.
Note: When using the infinite loop function, if you want to perform other function
configuration, you need to stop the infinite loop state.
1.Turn on the infinite loop function of the button
(Please do not enter configuration mode in the loop state)
a. Press the PS4 button / X1 button / NS Pro button + at the same time and
release to enter the infinite loop function configuration mode.
b. Perform the operation that needs to be cycled, and the device will automatically record
the operation. (it can record 8 groups of combo at most, 5 seconds of each combo at least,
and the operation will not be shielded)
c.Press the PS4 button / X1 button / NS Pro button
d. Press the button that triggers this infinite loop. After the setting is successful, the
configuration mode will be automatically exited.（or press the PS4 button / X1 button
/ NS Pro button once more to exit）
2.Clear a single Auto infinite loop function
(Please do not enter the configuration mode in the loop state, for example, the A key is in
the infinite loop state, please press the A key again to exit this state)
a. Press the PS4 button / X1 button / NS Pro button + at the same time
and release to enter the infinite loop function configuration mode.
b. Press the PS4 button / X1 button / NS Pro button
c. Click the button that previously configured to trigger an infinite loop.After setting up
successfully, it will exit the configuration mode automatically (or press the PS4 button /
X1 button / NS Pro button once more to exit).
3.Clear all Auto infinite loop functions
(Please do not enter the configuration mode in the loop state, for example, the A key is in
the infinite loop state, please press the A key again to exit this state)
a. Press the PS4 button / X1 button / NS Pro button + at the same time and
release to enter the infinite loop function configuration mode.
b. Hold down the PS4 button / X1 button / NS Pro button for 3 seconds, all the
To Next Page
Loading...
