c. Hold down the middlePS4 button / X1 button / NS Pro button and
PS4 button / X1 button / NS Pro button, and do not release
d. set a value: press the , the value of a increase of 100; press the right two , a
value increased by 20; press the eight , a value increased by 8. Total 128
e. Set the b value: Press the , the value of b increases by 100; press the six , the b
value increases by 60; press the four , the b value increases by 4. Total 164
f. release the middle and PS4 button / X1 button / NS Pro button and
PS4 button / X1 button / NS Pro button, the normal configuration, it will flash
green light.
g. If there is a configuration error during step 2 through step 6, you can reconfigure from
step 2. A value and b value can also be set separately.
h. Press the PS4 button / X1 button / NS Pro button to exit the configuration mode
5.Button supported
All the buttons except PS4 button / X1 button / NS Pro button, the
PS4 button / X1 button / NS Pro button and the PS4 button / X1 button
/ NS Pro button and the rocker
C
、
Auto combo
In the fighting games, an ultimate skill often needs to operate the handle in a certain rule.
The auto combo can record the combo and set to trigger by a certain button. After the
setting, the player can use the auto combo.
1.Setting
a. Press the PS4 button / X1 button / NS Pro button + PS4 button / X1 button
/ NS Pro button at the same time and release to enter the auto combo function
configuration mode.
b. Carry out the auto combo operation, and the device will record the combo automatically
(it can record 8 groups of combo at most, 5 seconds of each combo at least, and the