coov N100 Plus - Burst (Off by Default)

5.Examples 2(exchange touchpad and SHARE)
a. In this configuration process, double-click PS4 button / X1 button / NS
Pro button can not be simulated into other keys, so you need ps4 handle or pro handle
for this operation
b. Enter key mapping function configuration mode, press the （PS4 button /
X1 button / NS Pro button） /（PS4 button / NS Pro button） /
（PS4 button / NS Pro button） / （PS4 button / X1 button / NS
Pro button）, then press PS4 button / X1 button / NS Pro button to exit
6.Button supported
All buttons except the PS4 button / X1 button / NS Pro button and the rocker
B
、
Burst (off by default)
Burst control is used to configure the selected button to a burst mode. When the button is
in a burst mode, once it is pressed, it will simulate the pressing-releasing event at a
certain frequency, and the frequency is adjustable.
1.Turn on the burst
a. Press the PS4 button / X1 button / NS Pro button + PS4 button / X1 button
/ NS Pro button at the same time and release to enter the burst function configuration
mode.
b. Hold down the button that needs to turn on the burst function, and then press the
PS4 button / X1 button / NS Pro button, so that the burst function of the
corresponding button can be turned on.
c. Press the PS4 button / X1 button / NS Pro button to exit the configuration mode.
2.Turn on the burst
a. Press the PS4 button / X1 button / NS Pro button + PS4 button / X1 button
/ NS Pro button at the same time and release to enter the burst function configuration
mode.