Linear control is used to turn off or turn on the linear response of the handle rocker and
trigger to achieve a shorter bond range and faster response speed.
1.Turn off the linear
a. Press the PS4 button / X1 button / NS Pro button + PS4 button / X1 button
/ NS Pro buttonat the same time and release to enter the linear control function
configuration mode.
b. Press the trigger that need to turn off the linear function, or dial the rocker that need to
turn off the linear function, and then click the PS4 button / X1 button / NS Pro
button to turn off the linear function of the corresponding trigger or rocker.
c. Press the PS4 button / X1 button / NS Pro button to exit the configuration mode.
2.Turn off the linear
a. Press the PS4 button / X1 button / NS Pro button + PS4 button / X1 button
/ NS Pro buttonat the same time and release to enter the linear control function
configuration mode.
b. B. Press the trigger that need to turn on the linear function, or dial the rocker that need
to turn on the linear function, and then click the PS4 button / X1 button / NS
Pro button to turn on the linear function of the corresponding trigger or rocker.
c. Press the PS4 button / X1 button / NS Pro button to exit the configuration mode.
3.Turn on the linear of all buttons
a. Press the PS4 button / X1 button / NS Pro button + PS4 button / X1 button
/ NS Pro buttonat the same time and release to enter the linear control function
configuration mode.
b. Hold down the PS4 button / X1 button / NS Pro button for 3 seconds, then all
the linear functions will be turned on automatically, and it will exit the configuration mode
automatically.
4.Button supported
Two rockers and two triggers
To Previous Page
