BODY PROTECTION
ELECTRICAL SAFETY
PRODUCT SAFETY NOTICES – OWNER’S REGISTRATION
WARNING: To avoid electrical hazards, fire hazards or damage
to the tool, use proper circuit protection.
The charger for this tool is wired at the factory for 100~240 V
operation. It must be connected to a 100~240 V, 15 A circuit that is
protected by a time-delayed fuse or circuit breaker. To avoid shock or
fire, replace the power cord immediately if it is worn, cut or damaged
in any way.
WARNING: Always wear non-slip gloves that fit properly to
protect your hands and to help you grip the tool.
WARNING: Always wear sturdy clothing with long sleeves and
long pants. Never operate the tool while wearing shorts, short
sleeve shirt or while shirtless.
WARNING: Always wear non-slip safety boots to prevent foot
injuries and slipping that could cause loss of control of the tool.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
NOTICE: Please register your GasLess™ ELITE Trimmer tool, Power Cells
and Power Cell chargers online at WWW.COREOUTDOORPOWER.COM in
order to permit the receiving of product safety notices from CORE™
Outdoor Power for potential future safety guidance communications and /
or safety product recalls. Note: The registration of product model number
and serial number is for safety communications purposes only and is not
for warranty registration purposes.
To Next Page
Loading...
Need help?
General
