Corghi CompactLine EM 9250 - Transport, Storage and Handling

74 EM 9250 Operator’s manual
TRANSPORT, STORAGE AND HANDLING
Handling and manoeuvring before installation
The basic wheel balancer packaging consists of 1 wooden crate containing:
- the wheel balancer (Fig.7)
- equipment;
- the wheel guard and corresponding mounting tube (C, Fig.4a - D, Fig. 4a).
Before installation, the wheel balancer must be shipped in its original packaging, making
sure that the machine is maintained in the position indicated on the outer packaging. The
machine can be moved by placing the packaging on a wheeled trolley or inserting the
forks of a fork lift truck in the relative slots in the pallet (Fig. 1).
1
- Packaging dimensions:
Length Depth Height Weight Packaging weight
(mm) (mm) (mm) (kg) (kg)
1150 990 1175 120 (PR version) 30
110 (no PR version)
- The machine must be stored in an environment meeting the following requirements:
• relativehumidityrangingfrom20%to95%;
• temperaturerangingfrom-10°to+60°C.
WARNING
Do not stack more than two packs to avoid damaging them.
After installation, the machine can be moved using the following methods:
- with a crane, using special equipment that holds the machine at the designated lifting
points (Fig. 2);