EasyManua.ls Logo

cormidi 80 Series - 3.5. Driving the Machine

Default Icon
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Series 65-80
32
3. INSTRUCTION FOR USE
3.1. FIRST USE
READ CAREFULLY: B
efore using the
machine you must read all of the instructions
in this manual and the user’s and
maintenance manual of the motor installed on
your machine scrupulously. Furthermore,
always keep it attached to the machine.
The owner's
manual and main-
tenance, together
with the manual of
the engine of the
machine, must be
always easily availa-
ble and should be
kept in the dedicated
container fixed on
the machine (see the
fig. 50).
The machine is normally delivered completely
assembled and ready for use with an empty fuel tank.
Fill the fuel tank, open the fuel tap and follow the start-
up procedure described in the appropriate paragraph.
3.2. BREAKING-IN PERIOD
The technology used during the construction of your
machine does not require a break in period. However,
during the first period of use, it is necessary to use these
precautions:
During the first 50 hours, avoid using the motor at over
70 % of the total power.
READ CAREFULLY:
Read the user’s manual
and the maintenance manual for the motor
installed in your machine carefully and follow
the instructions prescribed for its own break
in period.
After the first 20 hours of operation, check the level of
the hydraulic oil in the tanks.
fig. 50 Container
for manuals

Related product manuals