Maintenance
47
4. MAINTENANCE
DANGER: always carry out all maintenance
operations with the motor off and with the
start up keys not inserted.
A good maintenance is necessary and is the secret to
obtaining low running costs, to lengthening the life of your
machine, and to always maintaining it at its highest
efficiency.
Beyond the normal maintenance operations on the
mechanic and hydraulic parts, it is a good rule to carry out
a periodic washing of the machine and to proceed with a
careful cleaning to take away all mud residues. After
every wash it is necessary to grease all of the parts that
are subject to friction, as specified in the paragraph
“Greasing”.
4.1. MAINTENANCE INTERVALS
To maintain the highest level of efficiency, it is
necessary that the maintenance be carried out at regular
programmed intervals.
In the following table a summary of the maintenance
operations is listed that are to be carried out periodically.
Maintenance and Adjustment Table
Work
Frequency
Description
Verify
Greasing
Cleaning
Adjustment
Substitution
Every 8 hours
Machine
Drive Levers
Command Levers
Body
Auto-loading
“Hi-Tip” lift
Track rollers
Motor oil
(1)
Every 50
hours
Tracks
Hydraulic oil
Air filter
(1)(2)
Every 100 h. Parking Brake
Every 200 h. Motor wheel hubs
Every year
or 300 hours
Hydraulic oil
Hydraulic services oil filter
Hydraulic drive oil filter
Dry air filters
(1) (2)
Motor oil
(1)
(1)
Check with the attached manual for the motor
(2)
In dusty areas you must increase the frequency
To Next Page
Loading...
