cormidi 80 Series - 7 Summary

Series 65-80
62
7. SUMMARY
Introduction ................................................................. 2
1. General Information .............................................. 1
1.1. Warranty ......................................................... 1
1.2. Goal of the Manual.......................................... 1
1.3. Machine Description ....................................... 2
1.4. Safety Information .......................................... 3
1.5. Machine and Manufacturer Identification ....... 5
1.6. Safety Devices ................................................. 5
1.6.1. Blocking the Body ..................................... 5
1.6.2. Blocking the Arm ....................................... 6
1.6.3. Blocking the Footrest ................................. 6
1.6.4. Blocking the Lift (“Hi-Tip”) ...................... 6
1.7. Accessories...................................................... 7
1.8. Safety Tags ...................................................... 7
1.8.1. Safety Distance .......................................... 8
1.8.2. Hot Surface ................................................ 8
1.8.3. Fan ............................................................. 8
1.8.4. Crushing ..................................................... 9
1.8.5. Cutting........................................................ 9
1.8.6. Procedure for Caution ................................ 9
1.8.7. Overturning ................................................ 9
1.8.8. Maximum Slopes ..................................... 10
1.8.9. Procedure for Addressing Slopes ............. 10
1.8.10. Other Tags .......................................... 10
Admissible Slopes ................................................. 11
1.9. Dimensions ................................................... 11
1.10. Technical Data .............................................. 12
2. Commands .......................................................... 13
2.1. Hydraulic Overturning Version .................... 13
2.2. Autoloading Version ..................................... 17
2.3. Autoloading Version with Swivel Bucket .... 22
2.4. “Hi-Tip” Version .......................................... 27
3. Instruction for use ............................................... 32
3.1. First Use ........................................................ 32
3.2. Breaking-in Period ........................................ 32
3.3. Motor Start-up .............................................. 33
3.4. Refuelling ..................................................... 33
3.5. Driving the Machine ..................................... 34
3.5.1. Driving Position ....................................... 35
3.5.2. Forward Gear ........................................... 35
3.5.3. Reverse Gear ............................................ 35
3.5.4. Travelling on Slopes ................................ 36
3.5.5. Stopping Movement ................................. 37
3.5.6. Movement in Curves ................................ 37
3.5.7. Counter-rotation ....................................... 37
3.6. Stopping and Parking .................................... 38
3.7. Using the Parking Brake ............................... 38
3.8. Transporting Loads ....................................... 39