Series 65-80
58
Inconvenience Causes Remedy
The machine does not move.
The parking brake is activated. Deactivate the parking brake
Not enough oil in the hydraulic circuit. Restore oil to the correct level
The tracks are broken. Replace the tracks
Breakdown in the hydraulic
components.
Have the motor looked at by a mechanic with this
specific competence
Excessive noise from the tracks during
movement.
Incorrect track tension. Register the tension.
Broken or worn tracks. Replace the tracks.
Broken rollers or ball bearings.
Have the motor looked at by a mechanic with this
specific competence
Excessive noise from the body or from
the arms of the bucket.
Needs greasing.. Greasing
Broken rollers. Have the machine repaired by a mechanic
The accelerator does not respond. Il cavo dell’acceleratore è rotto. Fate sostituire il cavo da un’officina meccanica
The motor does not work correctly or
makes an excessive amount of noise.
Various causes.
Have the motor looked at by a mechanic with this
specific competence
The motor does not develop power.
The air filter is blocked. Replace the air filter.
Various causes.
Have the motor looked at by a mechanic with this
specific competence
The motor does not start.
Not enough fuel. Refuel the machine
The start-up procedure was not carried
out correctly.
Follow the correct start-up procedure
The battery is dead. Have the battery recharged or replace it
To Next Page
