To Next PageTo Next Page
Need help?Do you have a question about the CORNING OV-1000 and is the answer not in the manual?
General| Brand | CORNING |
|---|---|
| Model | OV-1000 |
| Category | Measuring Instruments |
| Language | English |
Illustrates and labels the physical features and ports of the OV-1000 unit.
Explains the procedure for installing and removing interchangeable test modules.
Details how to power the unit on, off, or put it into sleep mode.
Guides on launching and closing applications like OTDR, VFL, or Power Meter.
Displays and explains the main menu interface for selecting modules and applications.
Provides instructions for installing the UI connector adapter onto the baseplate.
Explains how to access and configure environmental settings like Date/Time.
Details the process of installing the OTSView software on a computer for data analysis.
Outlines the basic steps to attach fiber and start an OTDR test.
Details the General tab settings for OTDR setup, including display and units.
Explains the Acquisition tab settings for OTDR testing, including parameters and fiber specs.
Details the Analysis tab settings for OTDR traces, including thresholds and span settings.
Covers Event Table settings for marking faults, thresholds, and display options.
Describes the Auto Mode testing feature for automated OTDR trace acquisition.
Illustrates the Auto Mode OTDR interface, showing trace display and controls.
Shows the Events tab in Auto Mode, detailing detected events and definitions.
Displays the Trace Info tab in Auto Mode, showing trace and testing parameter details.
Explains the Source tab in Auto Mode for using the OTDR port as a light source.
Introduces Advanced Mode for manual control of OTDR testing parameters.
Shows the OTDR tab in Advanced Mode, detailing manual parameter controls.
Details the Measure tab in Advanced Mode for marker placement and measurements.
Explains Template Mode for comparing traces against a reference or standard.
Illustrates the VFL tab interface for controlling the VFL's power and modulation.
Shows the Power Meter tab interface for wavelength selection and readings.
Guides on configuring header details for trace reports, including templates.
Details the process and requirements for printing trace reports.
Describes connecting the OV-1000 to a PC using ActiveSync for data transfer.
Explains how to access OV-1000 files as a mobile device in "My Computer".
Shows the probe inspection screen interface for live video and snapshots.
Provides contact information for service, calibration, and technical assistance.
Explains the four-point method for measuring event loss in OTDR traces.
Describes how to measure Link Segment Attenuation (LSA) loss using markers.
Explains how to measure section attenuation (dB/km) using two-point methods.
Details how to measure reflectance of events in OTDR traces.
Explains how to measure Optical Return Loss (ORL) using markers.
