CORRECT CRAFT Boat - Through-Hull Fittings

Section 8
8-8
7. Replace the safety wire.
NOTICE
Replace the safety wire. It is very important. Use a stainless steel
safety wire of at least 0.032" diameter.
Through-Hull Fittings
All fittings that actually pass through the hull on the wetted surface
are caulked in. These are not serviceable and must not be tampered
with.
CORC110
Nautique Ski Sec 8.qxd:Nautique Ski Sec 8.qxd 6/24/08 12:19 PM Page 8-8