10-1
Section 10
Storage
Lifting Rings
Your boat has lifting rings at the bow and at the stern. These are
designed to lift your boat in a steady and secure manner. Make sure
the winch, hooks and other components of the lifting mechanism
have sufficient capacity sufficient for your boat. Refer to Section 3
Specifications. The weights listed in the specifications are dry
weight. You must add the weight of the battery, fuel and gear to the
dry weight.
NOTICE
Only use a hook that will pass easily through the lifting ring
without binding. A hook that is too large or off-center could break
the lifting ring. DO NOT use a sling to lift the boat. Damage to
your boat can occur.
Drain the bilge and / or launch control system
and/or aftermarket water bladder(s) to eliminate excess
water before you lift the boat.
To Next Page
Loading...
