4-15
Controls and Indicators
Button Function
The MPH/RPM button turns Nautique Cruise ON and OFF.
• When Nautique Cruise is OFF, a push and release of the
button will turn Nautique Cruise on in “SPEED MODE,”
while a push and hold will turn Nautique Cruise on in “RPM
MODE.” Turning Nautique Cruise on in either mode will
illuminate the appropriate light on the dash display.
• When Nautique Cruise is ON, a push and release or a push
and hold of the button will turn Nautique Cruise OFF, also
turning off the dash indicator light.
The SET and CNCL buttons respond the same way to a “push and
release” or a “push and hold.”
• If the SET light is off or flashing, the SET button activates
Nautique Cruise at the current boat speed, causing the SET
light to illuminate continuously while controlling the boat
speed.
• If the SET light is on continuously, the SET button will have
no effect.
• If the SET light is on continuously or flashing the CNCL
button will turn the SET light off and allow the boat to be
driven with the hand throttle.
• If the SET light is off the Set button will have no effect.
The s (increment) and t (decrement) buttons respond the same
way to a “push and release” or a “push and hold” and will only
function if the SET light is on continuously.
• The s (increment) button will raise the set speed
approximately 1/4 mile per hour.
• The t (decrement) button will decrease the set speed
approximately 1/4 mile per hour.
To Next Page
Loading...
