Corvalent Q35SBC - CPU Configuration Settings; IDE Configuration Settings; Floppy Configuration Settings; Super I;O Configuration Screen

► CPU Configuration Settings
This screen allows the user to change Processor related parameters
Hardware Prefetcher Enable or Disable
Adjacent Cache Line Prefetch Enable or Disable
Max CPUID Value Limit Enable or Disable
Intel ® Virtualization Tech Enable or Disable
Execute-Disable Bit Capability Enable or Disable
Core Multi-Processing Enable or Disable
PECI Enable or Disable
Intel® Speedstep™ Tech. Enable or Disable
► IDE Configuration Settings
This screen shows the user the IDE devices.
Primary IDE Master Not Detected
Secondary IDE Master Not Detected
Third IDE Master Not Detected
► Floppy Configuration Settings
This screen allows the user to select the Floppy drive configuration.
Floppy Drive A:
Disabled, 360KB, 1.2MB, 1.44MB and 2.88MB
► Super I/O Configuration Screen
Onboard Floppy Controller
Set this option to enable to enable the floppy drive controller
on the motherboard. The settings are Enabled and Disabled.
The default setting is enabled.
Serial Port 1 Address
This option selects the base I/O port address and IRQ of the
serial port.
Serial Port2 Address
This option selects the base I/O port address and IRQ of the
serial port.
Serial Port2 Mode
This option allows the user to configure COM2 modes
34