Safety Precautions Warning!
Static Electricity Warning!
The Q35SB has been designed as rugged as possible but can still be damaged if jarred sharply or
struck. Handle the motherboard with care.
The Q35SB also contains delicate electronic circuits that can be damaged or weakened by static
electricity. Before removing the board from its protective packaging, it is strongly recommended that
you use a grounding wrist strap. The grounding strap will safely discharge any static electricity build
up in your body and will avoid damaging the motherboard. Do not walk across a carpet or linoleum
floor with the bare board in hand.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference.
You are cautioned that any change or modifications to the equipment not expressly approved by the
party responsible for compliance could void your authority to operate such equipment.
CE Notice
This is a CE approved product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Conventions Used in this Manual
8
Notes - Such as a brief discussion of memory types.
Important Information - such as static warnings, or
very important instructions.
When instructed to enter keyboard keystrokes, the
text will be noted by this graphic.
6
To Next Page
Loading...