22
XXXXX XXXXX
21
Accessories on Select Models
WARNINGS: Harness system must be installed
correctly. Failure to follow these steps can result in serious
injury or death.
Head Pillow
To remove head pillow, from
the back of the head pillow gen-
tly pull the fabric tabs out from
the shoulder harness slots.
To attach the head pillow,
slide the fabric tabs into shoul-
der harness slots.
Body Pillow
To remove body pillow, slide
out from behind the harness
straps.
7. Attach Harness Strap
Loops to Splitter
Plate As Shown
Sewn ends of the harness strap
loops
MUST face towards you.
DO NOT twist harness straps or
harness adjustment strap.
Make sure the harness strap loops
are fi tted COMPLETELY ON both
sides of the splitter plate.
To Next Page
Loading...
