6
XXXXX XXXXX
Changing Position of Buckle
5
1. Turn Seat Over
Locate buckle’s metal retainer on
bottom of shell.
2. Rotate Metal Retainer
and Push It Up Through
Shell and Pad
3. From Top of Seat, Pull
Buckle Out of Shell
4. Insert Buckle’s Metal
Retainer into Slot
Closest to Child
Buckle MUST face out.
You MUST use the 1st or 2nd buckle
slots when child restraint is used
rear facing.
Any slot can be used when forward
facing.
5. Pull Metal Retainer
Completely
Through Pad
and Shell
6. Check Buckle
Pull up on buckle to make
sure it is secured.
The buckle
MUST not pull
out.
WARNING: Failure to place buckle’s metal retainer
completely through pad and shell can result in serious
injury or death.
To Next Page
Loading...
