35
COMPLETE CONNECTION
Electrical Shock Hazard
Disconnect power before servicing.
Plug into a grounded 3-prong outlet.
Do not use an adapter or an extension cord.
Failure to do so can result in death, fire, or electrical shock
D
C
A
D
B
A. Rapid (Large)
B. Auxiliary (Small)
C. Triple Ring (X-Large)
D. Semi Rapid (Medium)
1. Open the manual shutoff valve in the gas supply line. The valve is open
when the handle is parallel to the gas pipe.
2. Test all connections by brushing on an approved noncorrosive leak-
detection solution. If bubbles appear, a leak is indicated. Correct any leak
found.
3. Remove, if any, packaging tapes securing the burners on the surface. If
the cooktop burner bases and caps are not pre-installed, remove them
from package containing parts, align and place the burner bases and
caps accordingly.
WARNING
To Next Page
Loading...
Need help?
General
