44
6. Replace the burner base, the burner caps, and the burner grates.
Complete Gas Conversion
1. Open shutoff valve in the gas supply line.
2. Plug in cooktop or reconnect power.
• Refer to "Gas Connection" section in the "Installation Instructions" section
for proper connection of the range to the gas supply.
• Refer to "Complete Connection" section to complete this procedure.
• Refer to the "Adjust Flame Height" section for burner flame adjustments.
IMPORTANT: You may have to adjust the low setting for each cooktop
burner.
Burner cap
Burner base
Igniter
Flame failure safety device
(for older versions)
To Next Page
Loading...
Need help?
General
