Disassembling and refitting
Coway co., Ltd
4-1
4. Disassembling and refitting
4-1 Disassembling and refitting information
4-1-1 Disassembling and refitting information
Before disassembling the product
- Unplug the system to prevent electric shock. (P-07QR only)
- Close the feed water supply valve to shut off the water supply.
- Completely drain the water from the water tank.
If water is splashed during the repair, insulation may deteriorate, resulting in danger.
(P-07QR only)
- When disassembling and refitting the unit with its side touching the ground, perform the job on a
working cloth. Without the working cloth, the product may get scratches.
Safety checking after the service
- Check that screws, parts, and wiring are in their original positions. (P-07QR only)
- Check that the wire coverings are not damaged. (P-07QR only)
- After refitting, check that water purification works.
- Check the tubing for water leaks.
- After the service, refit the product in its original state.
Exercise caution not to damage or deform any parts when disassembling the system.
Refit the system in the reverse order of disassembling.
4-1-2 Necessary tools
Tool Tool name
‘+’ Cross-head screwdriver
To Next Page
Loading...
Need help?
General
