No. Explanation Reference picture
2
3 1) Separate the fitting connected to the filter to replace
and then replace the filter. (Separate the fitting using
an appropriate tool.)
By changing the filter and connecting the fitting and
the hose precisely, check that there is no leakage
and drain the first purified water necessarily.
4 1) After closing with fitting the groove in the front cover
well, drop the cup-touch lever and the sliding front
deco. Plug in the faucet stopper blocked the faucet
again in place and close the top cover.
Use the new filter after cleaning.
- Neo-Sense Filter
: Install after cleaning with the main water for
about 3 minutes.
- Post-Carbon block Filter
: Install after cleaning with the water passed the
Neo-Sense Filter for about 3 minutes.
- Membrane Filter
: Install after cleaning with the water passed the
Neo-Sense Filter for about 3 minutes.