Disassembling and refitting
Coway co., Ltd
4-1
4. Disassembling and refitting
4-1 Disassembling and refitting information
4-1-1 Disassembling and refitting information
Before disassembling the product
- Block the main water by closing the main water supply valve.
- Completely drain the water from the water tank.
If
the water is splashed during the repair, insulation may deteriorate, resulting in danger.
- Please unplug.
- When disassembling and refitting the unit with its side touching the ground, perform the job on a
working cloth.
Without
the working cloth, the product may get scratches.
Safety checking after the service
- Check that screws, parts, and wiring are in their original positions.
- Check that the wire coverings are not damaged.
- After refitting, check that the water purification works.
- Check the tubing for water leaks.
- Check that all switches operate normally.
- After the service, refit the product in its original state.
4-1-2 Necessary tools
Tool Tool name
‘+’ Cross-head screwdriver
‘-’ Flat-bladed screwdriver
- Exercise caution not to damage or deform any parts when disassembling the system.
- Refit the system in the reverse order of disassembling.
To Next Page
Loading...
