EasyManua.ls Logo

Coyote C1P28 - Electrical Requirements and Safety; Electrical Grounding and Circuit Safety

Coyote C1P28
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
This appliance is rated at 120v and 60 Hz and should only be
serviced by a qualified service technician, or electrical shock
may occur
.
IMPORTANT: Electrical supply cords should be kept away from any heated surfaces.
Electrical Grounding Instructions
The Coyote Outdoor cooking appliance has a three-prong (grounding) plug installed for your protection
against shock hazards and should be plugged directly into adequately grounded three-prong outlets. Do
not cut or remove the third prong from this plug.
Electrical equipment provided with the outdoor cooking appliance shall follow these guidelines:
1. Do not use the Coyote Outdoor Living Pellet Grill for purposes other than intended.
2. Users should never submerge the cord or plug to avoid electric shock.
3. Make sure the unit is completely cool before installing or removing parts.
4.
Do not operate the Coyote Outdoor Living Pellet Grill with a damaged power cord or
plug or after the appliance malfunctions or has been damaged in any manner. Contact
the manufacturer for repair.
5. Do not let the power cord touch hot surfaces.
6. This outdoor cooking appliance only uses a Ground Fault Interrupter (GFI) protected circuit.
7.
Users should never use a two-prong adapter or have the third grounding prong
removed.
8.
Use only outdoor-rated three-prong extension cords with a “W” marking, rated for the
equipment's power.
Electrical Requirements