Check your local building codes for the proper method of installation. If an external electrical source is utilized, this
outdoor cooking appliance, when installed, must be electrically grounded in accordance with local codes. In the
absence of local codes, this unit should be installed in accordance with the National Electrical Code ANSI/NFPA No.
70 or the Canadian Electrical Code CSA C22.1, 1990, or the latest version.
• Before installing built-in grills in enclosures, copy all product information, such as the model and
serial numbers, and store information safely.
• If a professional installer or technician installs the grill, be sure that they show you where your
electrical supply shut-off is located.
Notice: We strongly recommend professional installation of your Coyote grill. These instructions provide
the measurements necessary to construct a masonry structure to house your outdoor pellet grill.
Location of your Grill:
Locate the grill only OUTSIDE in a well-ventilated area. Never locate the grill in a building, garage,
breezeway, shed, or other enclosed areas without an approved ventilation system. When in use, the grill
will generate a lot of smoke. When installing your grill, select an outdoor location to ensure an adequate
area for the smoke to dissipate TO AVOID INHALATION OF POTENTIALLY TOXIC FUMES.
Cutout Dimensions
Installation
To Next Page
Loading...