Tips to Avoid Pellet Jams:
• Make sure the burner pot is installed correctly.
• Make sure the pellets inside of the hopper do not get wet.
• Do not use the hopper for pellet storage.
Troubleshooting
If the grill does not function properly, use the chart below to assist in diagnosing the problem.
Troubleshooting is for general purposes only. ALWAYS ERR ON THE SIDE OF SAFETY. If the problem still
exists, contact our Coyote Customer Support line at 855-520-1559.
Possible Causes and Solutions:
• Check heat shield and cooking grates for excess food or grease
buildup.
•
Ensure the grill is not placed directly in the wind path.
•
Be sure drip trays are clean (do not use aluminum foil on drip trays.)
• Note: Flare-ups may be inevitable if cooking greasy foods.
Grill is Too Hot
• Excess grease build-up causing grease fires.
• Burner pot may have too many pellets at startup.
•
Set the grill to a lower temperature setting.
•
Make sure you run the entire cooldown after each cook.
Grill Will Not Turn
On
• Check to make sure the grill is plugged into a working outlet.
Make sure the burner pot is clear of pellets or buildup.
• Ensure the ON/OFF button is turned on.
Grill Shuts Off
• Adjust the low temp alarm in the setting menu. (Default is 5
minutes)
• Remove all contents from the grill and check the burner pot placement.
• Check for a pellet jam.
• If the problem still exists, contact our Coyote Customer Support at 855-
520-1559.