1. THROTTLE ADJUSTMENT KNOB-
This knob adjusts your engine RPMs.
Turning the knob counter clockwise
will increase RPMs. Turning the knob
clockwise will decrease RPMs.
IN ORDER TO AVOID BURNING THE CENTRIFUGAL CLUTCH,
NEVER ALLOW THE MACHINE TO SIT AND IDLE FOR LONGER THAN
ONE (1) MINUTE.
NOTES
2. TACHOMETER- This will display
both the machine RPMs and total
hours the machine has been in
use. Depressing the button on the
bottom right corner will toggle in
between the readouts.
OVER TORQUEING IN EITHER DIRECTION CAN CAUSE DAMAGE
TO THE THROTTLE CABLE.
CONTROLS
24/7 Technical Support- Toll Free 1-877-472-8200
13
Concrete Polishing Solutions- G-250XTP Operator’s Manual
To Next Page
Loading...