The G-250XTP machines are designed to be used by a professional.
The user is expected to have good knowledge and understanding
of the user and safety instructions before operating, inspecting, or
adjusting the machine. Following the safety instructions prevents
damage to the operator and the machine.
* This machine is not suitable for picking up hazardous dust.
* Never operate while under the inuence of drugs, alcohol, or
any other substance that could impair safe judgement.
* Do not operate equipment if it is damaged.
* Do not use the machine in areas where there is risk of re or
explosion.
* Before starting the machine, ensure that hose tting is
securley tightened to propane tank valve and there are no
leaks.
* Do not attempt to perform any maintenance or repair
activities while the machine is running.
* If you need to start the machine while the head assembly is in
the upright position, be certain there are no plates mounted
to the heads.
* Acceleration and vibration transmitted through the
handlebars pending testing.
* Temperature of xed wiring pending testing.
* Sound level of this unit is pending testing.
* Always wear protective gloves when changing plates to
prevent injury, as the plates will be hot after machine had
been in operation.
* Always wear the required personal protective equipment
(safety shoes, protective eye wear, etc.) as required by OSHA
guidelines when operating the machine.
SAFETY MESSAGES
24/7 Technical Support- Toll Free 1-877-472-8200
8
Concrete Polishing Solutions- G-250XTP Operator’s Manual
To Next Page
Loading...